Author Index

A

  • Abtahi, Mahdi Nonlinear control and Stability of the Tractor Semi-Trailer System based on the Sliding Mode Control In Order to Jackknife Prevention [Volume 22, Issue 1, 2020]
  • Adibi, Pouyan Numerical investigation of effective parameters of heat transfer in porous cavity with a cylinder using Lattice Boltzmann Method [Volume 22, Issue 4, 2021, Pages 205-240]
  • Adlparvar, Mohammad Reza Mechanical Buckling of FG-CNT Reinforced Composite Cylindrical Panels [Volume 22, Issue 1, 2020]
  • Ahangarpour, Ameneh An investigation of thermal conductivity dependence of hybrid nanofluids containing carbon nanotubes on temperature and time [Volume 22, Issue 2, 2020, Pages 74-84]
  • Asemi, Kamran Low velocity impact analysis of FGCNT annular plate [Volume 22, Issue 3, 2021, Pages 183-205]
  • Asgari, Gholamreza Dynamic instability of a three-layered soft-cored sandwich beam on elastic foundation [Volume 22, Issue 3, 2021, Pages 30-55]
  • Ashoori, Amir Numerical study on the performance of a solar adsorption chiller with working pair of activated carbon / Methanol [Volume 22, Issue 4, 2021, Pages 6-23]
  • Assari, Mohammadreza Numerical study of the effect of rotating conical obstacle on heat transfer and fluid flow in a heat exchanger tube [Volume 22, Issue 4, 2021, Pages 24-50]
  • Ayati, Moosa GPS based positioning of Satellite using cubature Kalman filter [Volume 22, Issue 3, 2021, Pages 56-79]
  • Azaria, parisa Evaluation of energy and exergy efficiency of a solar air collector with V grove absorber plate using mathematical modeling [Volume 22, Issue 2, 2020, Pages 148-175]

B

  • Baghani, Mostafa Finite strain swelling induced bending in bilayer gels: semi-analytical and numerical approaches [Volume 22, Issue 1, 2020]
  • Baghani, Mostafa A semi-analytic modeling of self-healing concrete beam in the framework of continuum damage-healing mechanic [Volume 22, Issue 3, 2021, Pages 6-29]
  • Bagheri, Rasul Computation of stress intensity factors in a functionally graded orthotropic half-plane weakened by multiple edge cracks under impact loading [Volume 22, Issue 3, 2021, Pages 99-120]
  • Bashishahabi, Peyman Laboratory study and simulation of the effect of geometric changes of the plate heat exchanger in improving its performance. [Volume 22, Issue 4, 2021, Pages 154-171]
  • Bashoki, Ehsan Dynamic modeling of hyperthermia treatment with simultaneous solving of convection-diffusion in tumor tissue [Volume 22, Issue 2, 2020, Pages 26-48]
  • Bayat, MohammadReza Finite strain swelling induced bending in bilayer gels: semi-analytical and numerical approaches [Volume 22, Issue 1, 2020]
  • Bazzaz, Ehsan Nonlinear Bending Analysis of Cylindrical Composite Panels Reinforced by Functionaly Graded Carbon Nanotubes [Volume 22, Issue 3, 2021, Pages 164-182]

E

  • Emamifar, Armin Energy, exergy and economic analysis of an improved hybrid cascaded compression-absorption refrigeration system [Volume 22, Issue 4, 2021, Pages 172-204]

F

  • Falavand Jozaei, Ali Experimental study of hydro-thermodynamic performance of two-pipe heat exchanger using nanofluid and double twisted-tape [Volume 22, Issue 2, 2020, Pages 197-217]
  • Farbod, Mansoor An investigation of thermal conductivity dependence of hybrid nanofluids containing carbon nanotubes on temperature and time [Volume 22, Issue 2, 2020, Pages 74-84]
  • Farivar, Faezeh Task space path following for planar redundant robots using Pontryagin’s principle in optimal control [Volume 22, Issue 1, 2020]
  • Farshidian far, Alireza Laboratory study and simulation of the effect of geometric changes of the plate heat exchanger in improving its performance. [Volume 22, Issue 4, 2021, Pages 154-171]
  • Fazaeli, Reza Experimental Study of the Effect of Sun Radiation on Photovoltaic Panel Performance in Winter and Summer seasons in Tehran [Volume 22, Issue 2, 2020, Pages 131-147]

G

  • Ghaemi Osgouie, Kambiz Task space path following for planar redundant robots using Pontryagin’s principle in optimal control [Volume 22, Issue 1, 2020]
  • Ghaffari, A. development an intelligent system for discretionary lane change behaviors in the real traffic flow [Volume 22, Issue 3, 2021, Pages 206-227]
  • Ghaffari, Ali Model Predictive Controller Design for Lateral Behavior in Real Traffic Flow [Volume 22, Issue 1, 2020]
  • Ghafouri, Ashkan Experimental study of hydro-thermodynamic performance of two-pipe heat exchanger using nanofluid and double twisted-tape [Volume 22, Issue 2, 2020, Pages 197-217]
  • Gharib, Mohammadreza Thermoelastic analysis of transient FGM thick cylindrical shells using first order shear deformation theory with considering the vertical transverse strains according to Mirsky- Herman assumption [Volume 22, Issue 1, 2020]
  • Ghasemi, Milad Investigation of the effect of porous media under the absorbent plate and thermal recovery on the efficiency of solar air heaters [Volume 22, Issue 2, 2020, Pages 85-102]
  • Ghazi, Mehrangiz Modeling and analysis of total site heat and power cogeneration from an exergoeconomic approach in a 4 MW case study [Volume 22, Issue 4, 2021, Pages 131-153]
  • Ghotbinasab, Samira Experimental investigation of the heat transfer coefficient in pool boiling using bubble dynamic in three aqueous, electrolyte and nanofluid solutions [Volume 22, Issue 2, 2020, Pages 176-196]
  • Goudarzi, Koorosh Numerical study on the performance of a solar adsorption chiller with working pair of activated carbon / Methanol [Volume 22, Issue 4, 2021, Pages 6-23]

H

  • Haghighatpars, Assal Task space path following for planar redundant robots using Pontryagin’s principle in optimal control [Volume 22, Issue 1, 2020]
  • Hamzehloo, Seyed Reza Impedance-based structural health monitoring of a Aluminium frame [Volume 22, Issue 1, 2020]
  • Hashemi, Raziyeh Mechanical Buckling of FG-CNT Reinforced Composite Cylindrical Panels [Volume 22, Issue 1, 2020]
  • Hashemian, Mohammad Dynamic Analysis of Micro Functionally Graded Beam under Moving Mass based on Modified Couple Stress Theory [Volume 22, Issue 3, 2021, Pages 142-163]
  • Hosseini, Rouhollah Experimental and numerical investigation on performance of sandwich panels using aluminum faces and polyurethane foam core with variable density against explosive loading [Volume 22, Issue 1, 2020]

J

  • Jahanpor, Javad Laboratory study and simulation of the effect of geometric changes of the plate heat exchanger in improving its performance. [Volume 22, Issue 4, 2021, Pages 154-171]
  • Jamshidmofid, Mohammad Investigation of the effect of porous media under the absorbent plate and thermal recovery on the efficiency of solar air heaters [Volume 22, Issue 2, 2020, Pages 85-102]
  • Jedari Salami, Sattar Nonlinear Bending Analysis of Cylindrical Composite Panels Reinforced by Functionaly Graded Carbon Nanotubes [Volume 22, Issue 3, 2021, Pages 164-182]

K

  • Kargar estahbanati, Arash Finite strain swelling induced bending in bilayer gels: semi-analytical and numerical approaches [Volume 22, Issue 1, 2020]
  • Kazemi, Amin A semi-analytic modeling of self-healing concrete beam in the framework of continuum damage-healing mechanic [Volume 22, Issue 3, 2021, Pages 6-29]
  • Kazemy, Ali Event-triggered robust control of active car suspension systems with parametric uncertainty and physical constraints [Volume 22, Issue 3, 2021, Pages 121-141]
  • Khodarahmi, Hossein Experimental and numerical investigation on performance of sandwich panels using aluminum faces and polyurethane foam core with variable density against explosive loading [Volume 22, Issue 1, 2020]
  • Khodayari, Alireza Model Predictive Controller Design for Lateral Behavior in Real Traffic Flow [Volume 22, Issue 1, 2020]
  • Khodayari, Alireza development an intelligent system for discretionary lane change behaviors in the real traffic flow [Volume 22, Issue 3, 2021, Pages 206-227]
  • Khondabi, Reza Experimental and numerical investigation on performance of sandwich panels using aluminum faces and polyurethane foam core with variable density against explosive loading [Volume 22, Issue 1, 2020]
  • Khooshehchin, Mohsen Experimental investigation of the heat transfer coefficient in pool boiling using bubble dynamic in three aqueous, electrolyte and nanofluid solutions [Volume 22, Issue 2, 2020, Pages 176-196]

M

  • Mahmoudi Monfared, Mojtaba Computation of stress intensity factors in a functionally graded orthotropic half-plane weakened by multiple edge cracks under impact loading [Volume 22, Issue 3, 2021, Pages 99-120]
  • Malekzadeh Fard, Keramat Dynamic instability of a three-layered soft-cored sandwich beam on elastic foundation [Volume 22, Issue 3, 2021, Pages 30-55]
  • Mirabdolah Lavasani, Arash Evaluation of energy and exergy efficiency of a solar air collector with V grove absorber plate using mathematical modeling [Volume 22, Issue 2, 2020, Pages 148-175]
  • Mirabdollah lavasani, Arash Experimental Study of the Effect of Sun Radiation on Photovoltaic Panel Performance in Winter and Summer seasons in Tehran [Volume 22, Issue 2, 2020, Pages 131-147]
  • Mirbeigi Moghadam, Amirreza Model Predictive Controller Design for Lateral Behavior in Real Traffic Flow [Volume 22, Issue 1, 2020]
  • Miripour Fard, Behnam Modeling and Adaptive Control of Temperature and Humidity of a Museum [Volume 22, Issue 3, 2021, Pages 80-98]
  • Mirzaei, Mostafa Mechanical Buckling of FG-CNT Reinforced Composite Cylindrical Panels [Volume 22, Issue 1, 2020]
  • Mohammadi, Maryam Assessment of the amount of residual stresses in a thermal barrier coating system due to deposition process using analytical, experimental and numerical methods [Volume 22, Issue 1, 2020]
  • Mohammadidoust, Akbar Experimental investigation of the heat transfer coefficient in pool boiling using bubble dynamic in three aqueous, electrolyte and nanofluid solutions [Volume 22, Issue 2, 2020, Pages 176-196]
  • Mohammadi Karachi, Arash Numerical investigation of effective parameters of heat transfer in porous cavity with a cylinder using Lattice Boltzmann Method [Volume 22, Issue 4, 2021, Pages 205-240]
  • Mohsenzadeh, Mohsen Impedance-based structural health monitoring of a Aluminium frame [Volume 22, Issue 1, 2020]
  • Mokhtari, M. Abolfazl Energy and Exergy Analysis of Two Configurations Rankin Organic Cycle in Heat Recovery of Internal Combustion Engine Heat [Volume 22, Issue 4, 2021, Pages 88-115]
  • Mokhtari, M. Abolfazl Thermal stability analysis of cylindrical shell reinforced with GPL graphene sheets using differential squares method [Volume 22, Issue 4, 2021, Pages 51-71]
  • Mousavi Naeinyan, Seyed Mojtaba Dynamic modeling of hyperthermia treatment with simultaneous solving of convection-diffusion in tumor tissue [Volume 22, Issue 2, 2020, Pages 26-48]

N

  • Naderi, Omid Modeling and Adaptive Control of Temperature and Humidity of a Museum [Volume 22, Issue 3, 2021, Pages 80-98]
  • Nazari, Nader Low velocity impact analysis of FGCNT annular plate [Volume 22, Issue 3, 2021, Pages 183-205]
  • Nemati, Mohammad The effect of wall shape and aspect ratio on heat transfer non-Newtonian power law fluid in the presence of magnetic field [Volume 22, Issue 4, 2021, Pages 116-130]
  • Nematzadeh, Amin Experimental study of hydro-thermodynamic performance of two-pipe heat exchanger using nanofluid and double twisted-tape [Volume 22, Issue 2, 2020, Pages 197-217]
  • Nikian, Mohammad Modeling and analysis of total site heat and power cogeneration from an exergoeconomic approach in a 4 MW case study [Volume 22, Issue 4, 2021, Pages 131-153]
  • Noori, Amir Numerical investigation of the effect of different forces on the relative velocity of nanofluid by developing a new solver in OpenFOAM [Volume 22, Issue 4, 2021, Pages 72-87]
  • Nozarpoor, Mohsen Dynamic Analysis of Micro Functionally Graded Beam under Moving Mass based on Modified Couple Stress Theory [Volume 22, Issue 3, 2021, Pages 142-163]

O

  • Olfati, Mohammad Investigation of the effect of porous media under the absorbent plate and thermal recovery on the efficiency of solar air heaters [Volume 22, Issue 2, 2020, Pages 85-102]

P

  • Payganeh, Gholamhasan Dynamic instability of a three-layered soft-cored sandwich beam on elastic foundation [Volume 22, Issue 3, 2021, Pages 30-55]
  • Pirmoradian, Mostafa Dynamic Analysis of Micro Functionally Graded Beam under Moving Mass based on Modified Couple Stress Theory [Volume 22, Issue 3, 2021, Pages 142-163]
  • Poursaeidi, Esmaeil Assessment of the amount of residual stresses in a thermal barrier coating system due to deposition process using analytical, experimental and numerical methods [Volume 22, Issue 1, 2020]

R

  • Rahbar, Nader Evaluation of energy and exergy efficiency of a solar air collector with V grove absorber plate using mathematical modeling [Volume 22, Issue 2, 2020, Pages 148-175]
  • Razavi zadeh, Seyed Erfan Event-triggered robust control of active car suspension systems with parametric uncertainty and physical constraints [Volume 22, Issue 3, 2021, Pages 121-141]
  • Rezaei, Davood GPS based positioning of Satellite using cubature Kalman filter [Volume 22, Issue 3, 2021, Pages 56-79]
  • Rostami, Mohsen Energy and Exergy Analysis of Two Configurations Rankin Organic Cycle in Heat Recovery of Internal Combustion Engine Heat [Volume 22, Issue 4, 2021, Pages 88-115]

S

  • Sabahi, Ali Experimental and Numerical Analysis of Turbine Performance Improvement by Changing Turbine Blade Inlet Angle [Volume 22, Issue 2, 2020, Pages 6-25]
  • Sabzikar Borojerdi, Mostafa Nonlinear Bending Analysis of Cylindrical Composite Panels Reinforced by Functionaly Graded Carbon Nanotubes [Volume 22, Issue 3, 2021, Pages 164-182]
  • Safarzadeh, Habibollah Investigation of the effect of porous media under the absorbent plate and thermal recovery on the efficiency of solar air heaters [Volume 22, Issue 2, 2020, Pages 85-102]
  • Salimi, Hossein Experimental Study of the Effect of Sun Radiation on Photovoltaic Panel Performance in Winter and Summer seasons in Tehran [Volume 22, Issue 2, 2020, Pages 131-147]
  • Saraei Sahnesaraei, Mahdi Nonlinear control and Stability of the Tractor Semi-Trailer System based on the Sliding Mode Control In Order to Jackknife Prevention [Volume 22, Issue 1, 2020]
  • Sefidgar, Mostafa Dynamic modeling of hyperthermia treatment with simultaneous solving of convection-diffusion in tumor tissue [Volume 22, Issue 2, 2020, Pages 26-48]
  • Shahsavari, Hamid A semi-analytic modeling of self-healing concrete beam in the framework of continuum damage-healing mechanic [Volume 22, Issue 3, 2021, Pages 6-29]
  • Shokri, Yaser Modeling and analysis of total site heat and power cogeneration from an exergoeconomic approach in a 4 MW case study [Volume 22, Issue 4, 2021, Pages 131-153]
  • Siyamak, Mohammad-Hassan GPS based positioning of Satellite using cubature Kalman filter [Volume 22, Issue 3, 2021, Pages 56-79]

T

  • Tabatabaei, Hamidreza Experimental and Numerical Analysis of Turbine Performance Improvement by Changing Turbine Blade Inlet Angle [Volume 22, Issue 2, 2020, Pages 6-25]

V

  • Vahidifar, Saeed Numerical study of the effect of rotating conical obstacle on heat transfer and fluid flow in a heat exchanger tube [Volume 22, Issue 4, 2021, Pages 24-50]
  • Vaziri, Seyyed amirreza Thermoelastic analysis of transient FGM thick cylindrical shells using first order shear deformation theory with considering the vertical transverse strains according to Mirsky- Herman assumption [Volume 22, Issue 1, 2020]

Y

  • Yaghoubi, Mahmood The Effect of office building orientation on solar heat gain, energy consumption and carbon production in hot and humid, hot and dry and cold climate, Iran [Volume 22, Issue 2, 2020, Pages 49-73]
  • Yaghoubi, Mahmood Numerical study on the performance of a solar adsorption chiller with working pair of activated carbon / Methanol [Volume 22, Issue 4, 2021, Pages 6-23]

Z

  • Zia Shamami, Mojtaba Experimental and numerical investigation on performance of sandwich panels using aluminum faces and polyurethane foam core with variable density against explosive loading [Volume 22, Issue 1, 2020]
  • Zohdi, Farzin Nonlinear control and Stability of the Tractor Semi-Trailer System based on the Sliding Mode Control In Order to Jackknife Prevention [Volume 22, Issue 1, 2020]